Analogue I/O - Temperature - Battery Powered Remote Temperature and Humidity Logger

Description:

Low-cost, remote temperature and humidity logger

Easy to use - no training required

Stores 16,382 temperature reading and 16,382 relative humidity measurements <

Supports -35 to +80 �C (+/- 1 �C accuracy)

Supports 0 to 100% relative humidity

All software included to install, configure and download data

Software includes powerful strip chart and export to Excel�

Protected against moisture to IP67 standard when cap is installed

Battery-operated

1-year warranty

The USB-502 logs up to 16,382 temperature and 16,382 relative humidity measurements concurrently.

Simply plug the USB-502 logger into any USB port on your PC?use the intuitive software to name the logger, set your start time and date, sample rate, units (�C or �F), and hi/lo alarms?and you're ready. Just place the logger on location and leave it. Status is indicated by flashing red/green and amber LEDs.

When you're through collecting data, plug the logger back in the USB port, download and save the data to your hard drive, display the data in a powerful strip chart, and/or export your data to an Excel� spreadsheet! All software and utilities are bundled with the USB-502 hardware!

Specification	Minimum	Typical	Maximum	Unit
RH Measurement Range RH Accuracy (overall error)	0		100	% RH
RH Measurement Range RH Accuracy (overall error)		±3.5*		% RH
Measurement Range	-35		+80	°C
Measurement Range	-31		+176	°F
Accuracy (overall error)		±1		°C
Accuracy (overall error)		±2		°F
Selectable sampling intervals	10 sec, 1 m, 5 m, 30 m, 1 hr, 6 hrs, 12 hrs			-
1/2 AA 3.6V lithium battery life	1			Year

*This specifies the overall error in the logged readings, for relative humidity measurements between 20 and 60% RH.