Features:
Flexible: Select the I/O required to match your application
Up to 75 analog or 144 digital I/O per logger
Easy-to-use, intuitive Windows setup
Uses standard SD card (2 Gbyte card included will hold up to 500 million samples)
Sample up to 100 samples per second PER CHANNEL
Rugged: tested -40 to +85°C, 5g Vibration, 50g shock
Compact: 4" x 4.1" x 4"
Start/Stop Logging via CAN-bus command
Extremely cost effective
AC, DC or battery powered
Program logger via Ethernet or store the program on the SD card
General Description:
The UEILogger™ 300 is a powerful, rugged, flexible and easy-to-use data logger/ recorder suitable for use in a wide variety of applications. Based upon UEI?s popular PowerDNA family it uses the same DNA series I/O boards. The UEILogger maintains all of the PowerDNA?s flexibility and adds a powerful standalone data logging/recording capability.
Each Logger Cube contains the Logger "engine" as well as 3 I/O slots. Configure your logger by selecting the I/O boards required to match your application. With over 20 different I/O boards available, there?s sure to be a configuration to meet your needs.
The UEILogger supports sample rates up to 100 samples per second on each I/O channel or port. Data is logged onto standard SD Cards (2 Gig SD Card included) and may be retrieved via the unit?s Ethernet port or the directly from the SD Card using a standard SD Card reader. The 2 Gig SD Card included will hold over 500 million 16-bit A/D readings.
The intuitive, Windows-based software provided configures the logger and extracts the data from the SD Card. There is absolutely no programming required. The software allows you to set input and output ranges, sample/update rates, signal conditioning, etc. all from simple pull down menus. The data logging "program" may be downloaded via the unit?s standard Ethernet port or stored on the SD Card.
Logging applications may be started and stopped Via Ethernet command, On power up, Start/Stop button, Real-time clock/calendar, Sync connector input, or based upon an analog input. The UEILogger cube may be placed on a desk or table or may be mounted to a wall, DIN Rail or in a standard 19" rack. The UEILogger may be AC, DC or battery powered.
"The UEI system is a key component in our new SimI/O equipped simulators," said Ron Jantzen, Director of Engineering, Simulation Systems, FlightSafety International
"It was a happy finding that the products on offer were also the best, the UEI [datalogger] was the only one of its type that could operate in sub-zero temperatures." Jon Croll, Design Engineer, MEL
